Hilti DD 110-U-22 Cordless Core Drill: What You Need To Know

TL;DR

Before you orderOffer from Amazon

Get backup power and energy gear delivered free with Prime

• Fast, free delivery on millions of items
• Prime Video, Amazon Music and more included
• Member-only deals all year

Start your free Prime trial →Free trial for eligible customers · Cancel anytime

As an affiliate, we earn on qualifying purchases.Hide

Pro Tool Reviews details Hilti’s DD 110-U-22, a Nuron-battery cordless core drill for wet and dry coring in concrete and masonry. The report lists a $2,349 bare-tool price and describes features including Intelligent Coring Guide, Rebar Boost and Active Torque Control; job suitability depends on how often a contractor cores.

Pro Tool Reviews has outlined the features, specifications and price of Hilti’s DD 110-U-22 cordless core drill, a Nuron B-22 battery-powered tool designed for wet and dry coring in concrete and masonry. The report lists the bare tool at $2,349 and describes drilling-assistance and safety systems intended to help contractors manage core drilling; it does not provide independent performance-test results.

The DD 110-U-22 supports wet and dry operation. For wet coring, its side grip has a quick-connect fitting to deliver water to the core barrel and a viewing window to check flow. For dry work, a dust extractor can connect to the same handle. Hilti recommends its DD-WMS Water Management System for water delivery, according to the report.

Hilti’s Intelligent Coring Guide monitors progress and pressure on the barrel, while an Electronic Starting Aid begins at a lower power level before ramping up. The source describes that initial level as 10% power. In stand-guided operation, Rebar Boost can add torque when the bit meets reinforcing steel; the report advises switching it off after passing through the steel to conserve battery and bit life.

The drill has a tool-free collet for changing compatible core barrels and an Assisted Core Extraction function that uses oscillation to help loosen a stuck concrete core. Active Torque Control (ATC) stops barrel rotation if the system detects a bind-up, according to the report. Listed specifications include 24 electronic gears, rated input power of 1,650 watts, a bare-tool weight of 16.3 pounds and a working weight of 42 pounds. The compatible stand is the DD-ST 22.

Features for Repeated Concrete Coring

The tool’s relevance is chiefly for contractors who core regularly, rather than people making occasional small holes. Its water and dust-extraction connections, assisted starts, rebar mode and core-removal function target setup, drilling and cleanup challenges that can affect repeated jobs. The report presents these as design features, not as measured guarantees of faster work or lower costs.

At a listed $2,349 bare-tool price, the purchase decision is tied to workload and the rest of a contractor’s equipment. Pro Tool Reviews says Hilti’s Fleet Pricing program lists a payment of $71.50 per month; the supplied report does not detail program terms or eligibility. For occasional coring, the source says the specialized capabilities may exceed what is needed.

Nuron Platform and Bit Choices

The DD 110-U-22 uses Hilti’s Nuron B-22 battery platform and accepts core bits within the range given in the report’s specifications: 15/32 to 5 3/16 inches. The feature discussion separately rounds the upper limit to 5 1/4 inches, so buyers should verify the exact supported size for a specific barrel and application with Hilti.

Hilti recommends its SPX-A Speed core bits for concrete and brick. Pro Tool Reviews says those bits are intended for handheld and rig-based coring, with an emphasis on drilling speed and battery efficiency. The drill is also listed as compatible with the DD-ST 22 stand, allowing stand-guided work where appropriate.

“It drops the power level down to 10% and then accelerates for full power.”

— Pro Tool Reviews, describing Hilti’s Electronic Starting Aid

Performance and Purchase Details

The supplied report does not state when the article was published, provide independent test measurements, or quantify drilling speed, battery runtime or the effect of the assistance features on productivity. It also does not specify which battery and charger, if any, are included in the $2,349 bare-tool listing, or give the terms behind the monthly Fleet Pricing figure. Those details may vary by package, seller or program and should be checked with Hilti.

There is also a minor specification discrepancy within the source: its feature section says the drill accepts bits up to 5 1/4 inches, while its listed barrel diameter range ends at 5 3/16 inches. The precise limit should be confirmed before choosing a bit. The report describes safety and drilling features but does not establish that they eliminate risks or replace proper operating procedures.

Verify Fit Before Buying

Contractors considering the DD 110-U-22 can check the current price, package contents, Fleet Pricing conditions and compatible bit sizes with Hilti or an authorized seller. They should compare the tool’s stated range and DD-ST 22 stand compatibility with the work they expect to perform, including whether wet or dry coring is required. The source provides no announced follow-up milestone or additional product update.

Key Questions

What is the listed price of the Hilti DD 110-U-22?

Pro Tool Reviews lists the bare tool at $2,349. It also reports a $71.50 monthly Fleet Pricing figure, but does not provide the program’s terms or eligibility requirements.

Can the DD 110-U-22 be used for wet and dry coring?

Yes. The report describes a side grip with a water quick-connect and flow-viewing window for wet work, and a connection for a dust extractor for dry work.

What core bit sizes does it accept?

The specifications list a range of 15/32 to 5 3/16 inches. The report’s feature section gives a slightly different upper limit of 5 1/4 inches, so confirm the supported size with Hilti before buying a barrel.

What safety and drilling-assistance features are described?

The report describes Intelligent Coring Guide, an Electronic Starting Aid, Rebar Boost for stand-guided operation and Active Torque Control, which is said to halt rotation when a bind-up is detected. These features do not remove the need to follow the tool’s instructions and safe work practices.

Who may benefit most from this drill?

Pro Tool Reviews says it may suit contractors who regularly core concrete or masonry. For occasional, smaller holes, the report suggests its specialized features may be more than necessary.

Source: rss